lp://qastaging/~aviksil/u-boot-linaro/add-armhf-support
- Get this branch:
- bzr branch lp://qastaging/~aviksil/u-boot-linaro/add-armhf-support
Branch merges
Branch information
Recent revisions
- 38. By John Rigby
-
* Update to upstream 2011.12.2 u-boot-linaro
* Add u-boot.img and MLO to omap3_beagle install files - 37. By John Rigby
-
* Update to upstream 2011.12.1 u-boot-linaro
* Add mx6qarm2 (Armadillo2) board
* Enable mx53ard, packaging only change enabling mx53ard target
* Update to new upstream
Adds default env for Samsung Origen board (LP: #893459)
* Packaging changes only
origen:
add origen-spl.bin to debian/platforms- debs-targets
modify debian/rules to deal correctly with targets that include a /
panda-splusb:
add u-boot-linaro- omap4-panda- splusb to debian/control
* New upstream release 2011.11.1 which includes omap4 usb spl booting
Reformat debian/platforms- debs-targets columns for longer target names
Added origen and omap4_panda_splusb to platforms-debs-targets
Fix ca5x2 deb name and add origen to control file
* New upstream release 2011.10.2
OMAP3: Beagle: set mac address from die id
OMAP3: Beagle: enable PXE support
OMAP3: Igep0020: enable PXE support
i.MX53: MX53loco aka quickstart: enable PXE support
* Packaging change only, add new plats for control file
* Packaging change only, add new plats for control file
* New upstream release 2011.10.1
Previous release rebased to upstream v2011.09 final
New commits from FSL LT:
mx53loco: add support for MC34708
New commits from ARM LT:
MMC: PL180: Fix infinite loop with VExpress extended fifo implementation
ARM: vexpress: move files in preparation for adding a new platform
ARM: vexpress: create A9 specific board config
ARM: vexpress: create A5 specific board config
ARM: vexpress: Change maintainer for ARM Versatile Express platforms - 36. By Ricardo Salveti
-
* omap4: reduce default operating point for 4460 devices
Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
(LP: #867670)
From bug report:
With both A9 cores loaded 4460 reaches max temperature in about 30s at the
current operating point of 930MHz. The operating point should be lowered to
700MHz.
It appears the panda heats more than I thought (and much more that the blaze),
and by loading the 2 cores I can quite easily reach max temperature at 920MHz
(it takes around 30s on my board!).
At 700MHz, the temperature still increases but much slower. So if the A9 cores
do not run at 100% all the time we shall be ok.
So for now, we definitely need this change if we don't want to run with a
heatsink...
* mmc: omap: enable high capacity
Enable high capacity to host capability.
Fixes eMMC detection on boot from MMC/SD card.
mmc: omap: config VMMC, MMC1_PBIAS
Config VMMC voltage to 3V for MMC/SD card slot
and PBIAS settings needed for OMAP4
(LP: #867650)
* FFe: u-boot-linaro 11.09, misc fixes for new silicon and boards
(LP: #851974)
mmc: omap: enable high capacity
mmc: omap: config VMMC, MMC1_PBIAS
omap4: fix pad configuration settings for SDP and Panda
omap4: make SDRAM init work for ES1.0 silicon
omap4: IO settings
pxe: make the first label the implicit default
OMAP4: removing fdt_addr from the default env
U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
(LP: #837235)
Revert "armv7: adapt omap3 to the new cache maintenance framework"
(LP: #862013) - 30. By John Rigby
-
Allow loading of u-boot.bin as well as u-boot.img
Feature freeze exception (LP: #836748)
Branch metadata
- Branch format:
- Branch format 7
- Repository format:
- Bazaar repository format 2a (needs bzr 1.16 or later)
- Stacked on:
- lp://qastaging/u-boot-linaro